top of page

Load data for .30-30 Win. + .308 | 214gr | SUS-TAC HPT

Recommended Powder(s): none

.30-30 Win. + .308 | 214gr | SUS-TAC HPT

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 214gr | SUS-TAC HPT
Manufacturer SKU:
H12827
Bullet Weight:
214gr | 13.9g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.781" | 45.2mm
Caliber:
.30-30 Win. load data
Case Length (l3):
2.039" | 51.8mm
Cartridge Length (C.O.L.):
2.512" | 63.8mm
Seated Depth:
1.308" | 33.2mm
Shank Seated Depth:
1.004" | 25.5mm
Case Capacity:
45.0 Grains of Water | 2.92 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B10342_C328
Last updated:
2025-01-01
Recommended Twist Rate:
1:8 - 1:7

Load data for 14 loads in caliber .30-30 Win. with .308 | 214gr | SUS-TAC HPT bullet and 7 powders such as none. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service. 

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
92%
41118
89%
**13
100%
ADI AR 2219
<<locked>>
95%
40509
87%
**29
97%
Alliant Reloder-10x
<<locked>>
96%
37246
80%
**93
99%
Alliant Reloder-7
<<locked>>
91%
41611
90%
**93
100%
Hodgdon H335
<<locked>>
96%
40335
87%
**36
96%
Norma 200
<<locked>>
94%
39697
86%
**16
100%
SNPE Vectan SP 10
<<locked>>
95%
40814
88%
**39
96%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
87%
35128
76%
**40
100%
ADI AR 2219
<<locked>>
90%
35070
76%
**54
95%
Alliant Reloder-10x
<<locked>>
92%
33547
72%
**44
98%
Alliant Reloder-7
<<locked>>
88%
37434
81%
**40
99%
[Hodgdon H335]*
<<locked>>
91%
35128
76%
**60
94%
Norma 200
<<locked>>
89%
34418
74%
**47
99%
[SNPE Vectan SP 10]*
<<locked>>
90%
33895
73%
**44
94%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page